Magnetic Monitor Mount - 13” to 34” Screens

Mounting a monitor used to mean drilling holes and hoping you measured right. This magnetic monitor mount skips that entirely. As long as you have a steel surface at least 1mm thick, like a pegboard, utility cabinet, or structural column, the 6 included magnets grip on and hold your screen securely, no holes required. It's rated to support up to 17.6 lbs, depending on your surface thickness, so you can add or remove magnets to dial in the right pull. The detachable VESA wall mount plate supports both 75x75mm and 100x100mm patterns, covering most monitors from 13"-34", and the arm extends just 6.4" (7” off the magnetic surface) for a clean, low-profile look. Once mounted, tilt it +90° to -90°, swivel 180°, or rotate a full 360° to land on the angle that cuts glare, in landscape or portrait. The mount itself measures 6" x 6", built from steel and plastic for a joint that stays solid under daily adjustments. Hardware and instructions are included for a simple setup.

• Screen Sizes: 13” to 34”
• VESA Standard: 75x75mm and 100x100mm
• Weight Capacity for 1mm to 1.5mm Material Thickness: 8.8 lbs (steel gauge)
• Weight Capacity for 1.5mm to 2mm+ Material Thickness: 17.6 lbs (kitchen appliances, HVAC ducts, metal pegboards, I-beams, structural columns))
• Please Note: Weight capacity of the mount is affected by thickness, coating, texture, etc. of the intended mounting surface. Please use caution during first use until you have determined that a strong hold has been achieved.

• Material: Steel, Plastic
• Magnetic Wall Mount Dimensions: 6” x 6”
• Articulation: +90° to -90° tilt, 180° swivel, 360° rotation
• Profile: 7”
• Arm Extension: 6.4”
• Included Magnets: 6
• Screen Orientation: Portrait or Landscape
• VESA Plate Dimensions: 4.5” x 4.5”
• Total Product Dimensions: 7” x 6” x 6”

• Assembly Manual PDF